zddshop
/
Product
/
Energy
/
250kw Big Power High Voltage 600V Inverter with 3 Phase Output for Hybrid System

250kw Big Power High Voltage 600V Inverter with 3 Phase Output for Hybrid System

$30000 /piece price excl.VAT

Negotiable
Order

Minimal order
100 pieces

Message Phone call

Product Specifications

--

Product Description

250kw Big Power high voltage 600V Inverter with 3 phase output for Hybrid System

We can make products according to your requirements.

Our BZP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.

  • Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
  • Intelligentized, modularized, simple structure design with powerful function.
  • Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
  • The output frequency can be setting via LCD panel, it's very convenient for customer.
  • The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
  • The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
  • Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
  • Low Frequency Transformer, which ensures that inverter has high efficiency.
  • High conversion efficiency, Max. Efficiency≥97%
  • Adopts black pure aluminum radiator, which confirms the best radiating performance.
  • Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
  • Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-400V or 300-800V.
  • Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
  • European CE (EMC, LVD) Certificate and accredited by Australian CEC, ERAC energy network.
  • Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.
  •  

ModelBZP-200KWBZP-250KW
Isolation modeLow Frequency Transformer
DC InputRated voltage (Vdc)600V
Rated current(A)333A417A
AC OutputRated output power200KW250KW
Output waveformPure Sine Wave
Rated Voltage380VAC±3%380VAC±3%
Phases3 phase 4 wire3 phase 4 wire
Rated current(A)303A (phase current)379A (phase current)
Frequency50Hz or 60Hz
Rated output voltage range (V)380/400/415/440VAC optional
Power Factor(PF)1
Overload Ability150%, 5 seconds
Efficiency>93%
Waveform distortion rate (THD)<3%(Linear load)
Dynamic Response (0 to 100% load)5%,≤50ms
DisplayLCD
Running modeWorking continuously
Electrical insulation properties2000Vac, 1 Minute
Communication interface (optional)RS485
Protection FunctionProtectionInput reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Cooling methodFan-cooled
Short-circuit protectionNo automatic recovery, need to restart the machine
Working environmentNoise ( 1 meter)≤50dB
Degree of protectionIP20(indoor)
Working Altitude(m)≤2000
Working temperature -25~+55ºC
relative humidity0~90%,non-condensing
Mechanical dimensionDepth*Width*Height1200x1200x1800mm
Weight (Kg)1200Kg1300Kg

also you can optional "dry contact control "start the generator.

1, the first normal open dry contact control generator start, when the inverter shuts off from low DC voltage, 

the dry contact into normal closed status to start your generator.

2, the second normal closed dry contact, when the battery voltage recover to normal, 

the inverter start to work and the normal closed dry contact disconnected, can be used to stop the generator.

In a word,we can do according to your requirements.

100-400V or 300-600V or 400-800V wide input for without battery and controller system

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--


Comments
Welcome to zddshop comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations, you may see comments from our Community Managers.
Sign up to post
Sort by
Show More Comments

Other offers of this wholesaler

Copyright 2023-2026 - www.zddshop.com All Rights Reserved