Shopping information | Product introduction

10.5" Rim Shape Plate

Latest News

13" Rectangular Tray

Mar 23, 2025

8.25" Openwork Plate

Mar 23, 2025

7.625" Minuet Salad Plate

Mar 23, 2025

10.75" Porcelain Coupe Dinner Plate

Mar 23, 2025

6.625" Square Plate

Mar 23, 2025

10.25" Scrolled Plate, SELECTED SECONDS

　　Serve dinner on this 10 1/4 porcelain scrolled plate. The plate has an embossed design along its rim and shaped edges. Made in China. Microwavable and dishwasher safe. Matches 2474 and 6917. This item is a SELECTED SECOND. It contains slight imperfections. All sales final. ...

12" Square Plate

14.5" Openwork Ruffled Plate

8" Openwork Round Plate

10.5" Rim Shaped Dinner Plate

10.25" Rim Shaped Dinner Plate

9.75" Scrolled Edge Plate, SELECTED SECONDS

10" x 1" Deep Plate

9.75" Porcelain Bernadotte Plate

12" Fancy Antique Scrolled Plate, SELECTED SECONDS

Popular recommendations

Post for Kiln, 4"

　　These ceramic posts are designed to hold your kiln shelves securely and withstand the high temperatures of the kiln. Use 3 or 4 posts to securely hold your shelf in place. ...

Kiln Stilt, Size #10

　　Kiln Stilts, Size #10- 4.5 diameter. Use to stack pieces from 6 to 12 in diameter. Useful for keeping large pieces off the kiln floor or shelf allowing increase airflow. 　　Stilts are used to separate china when firing in the kiln. Proper use of stilts allows much more efficient firing...

Post for Kiln, 3"

　　These ceramic posts are designed to hold your kiln shelves securely and withstand the high temperatures of the kiln. Use 3 or 4 posts to securely hold your shelf in place. ...

Orton Small Pyrometric Cones, 019

　　Box of 50 cones - Use this SMALL pyrometric cone with your freestanding cone holder to indicate when your kiln firing has reached the desired temperature. Firing temperature: 1333 F 723 C. 　　Please note that the cones can come in pairs that need to be split apart. The box will...

Kiln Vent for FX1814 and FTX911M kilns

　　This kiln vent will make your firing process much more efficient, consistent and pleasant. The KV 1 vent measures 12 1/4 across and 9 high and is designed for small and medium sized kilns. The kiln vent is very easy to install under your kiln and will greatly improve the...

Kiln Stilts, Size #6

　　Kiln Stilts, Size #6- 3 diameter. Use to stack pieces from 4 to 7.5 in diameter. 　　Stilts are used to separate china when firing in the kiln. Proper use of stilts allows much more efficient firing as pieces can be stacked and airflow can be maintained for consistent firing results....

Peephole Plug for Kiln

　　This refractory peep hole plug is used to go into the peep hole in the kiln when you want to limit the amount of fresh air going into the kiln or the amount of heat leaving the kiln. Just place the plug in place and remove when suitable. Make sure...

Cone Holder for Junior Pyrometric Cones

　　The cone holder will allow you to view your cones through the peep holes of your kiln. It can be set on a cone shelf or on a kiln shelf, situated under your peep hole. These are designed to hold Orton junior pyrometric cones and can be coated with kiln...

Kiln Wash, 1 pound container

　　Kiln Wash is a powder that is mixed with water to form a loose paste, It is then painted on surfaces within the kiln to keep glazes and clay from sticking to the refractory materials. You can coat your shelves and posts to prevent materials sticking to them. It is...

Orton Small Pyrometric Cones, 015

　　Box of 50 cones - Use this SMALL pyrometric cone with your freestanding cone holder to indicate when your kiln firing has reached the desired temperature. Firing temperature: 1549 F 843 C. 　　Please note that the cones can come in pairs that need to be split apart. The box will...