100ah Solar DC Power System with Built-in Controller and Battery
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
100ah Solar DC Power System with Built-in Controller and Battery
The DC Power System combines controller with built-in battery(optional) all in one and output DC voltage, using for small power load, such as phone, computer, LED light, etc.. It has the portable, easy operating, safe characteristics. Now, SNAT has 5 models of this series, DL-7AH, DL-12AH, DL-24AH, DL-50AH, DL-100AH with 12VDC output ports and 5VDC USB output ports.
This system uses PWM charging mode and the inner temperature sensor, charging efficiency is 3%-6% higher than non-PWM and increasing power consumption time.
What's more there are many protecting measures, such as short circuit, overload, unique reverse, shut off automatically when the battery full of or discharge, and then restore, etc..
OEM/ODM ACCEPTED
DL 100AH- Power bank 100000mAh
DL-7AH
Product Size: L*W*H=193×96×136mm
Package Size: L*W*H=237×147×178mm
DL-12AH
Product Size: L*W*H=193×126×156mm
Package Size: L*W*H=237×177×198mm
DL-24AH
Product Size: L*W*H=234×163.6×244mm
Package Size: L*W*H=298×235×285mm
DL-50AH
Product Size: L*W*H=288×175.6×279mm
Package Size: L*W*H=348×245×320mm
DL-100AH
Product Size: L*W*H=383*213*300mm
Package Size: L*W*H=460*290*365mm
Product Display
DL solar power back up is convenience for outdoor, Camping, Ship, Emergency, Island and ect:
1. Moblie-Phone charging
2. DC LED lighting
3. DC fan
4. DC BBQ
5. Camping Light
6. Emergency lighting
7. Laptop charging and ect..
Technical Parameters
| Model | DL-7AH | DL-12AH | DL-24AH | DL-50AH | DL-100AH | |
SOLAR PANEL | Type | Monocrystalline silicon or polycrystalline silicon panel of class A
| ||||
| Dimensions(mm) | 96*136*193 | 126*156*193 | 163*244*234 | 176*279*288 | 213*300*383 | |
| Power | 10w | 20w | 30w | 50w | 100w | |
| Solar controller | Control mode | Efficient PWM | ||||
| Charge current | 5A/12V | 10A/12V | ||||
| Protection functions | Overcharge protection,overdischarge protection,electronic circuit protection,overload protection | |||||
| Voltage of overcharge protection | 14.3V | |||||
| Voltage of boosting protection | 14.0V | |||||
| Voltage of floating charge | 13.8V | |||||
| Voltage of overdischarge protection | 10.5V | |||||
| Display of nixie tube | Current voltage of the battery | |||||
| Indication of LEDS | Charge indication,load indication,and battery indication | |||||
| Battery | Battery type | Deep-cycle maintenance-free-acid battery | ||||
| Battery capacity | 12V/7AH | 12V/12AH | 12V/24AH | 50AH | 100AH | |
| DC output | Maximum output power | 60W(12V/5A) | 120W(12V/10A) | |||
| DC 12V | 2 output ports | 4 output ports | 5 output ports | 6 output ports | ||
| DC5VUSB | 1 USB output port (MAX.2A) | 2 USB output port (MAX.3A) | ||||
| Accessories included | 12VDC LED indicator | A 3W LED and a 5W LED (inclluding 2 lamp holders,a 3M lamp wire and a 5W lamp wire) | Two 3W LEDs and two 5W LEDs (inclluding 4 lamp holders,two 3M lamp wires and two 5W lamp wires) | |||
| USB charge line | A universal charge line | |||||
| Solar panel bracket | A set (including 2 pieces) | |||||
| Electric wire of the solar panel | 5M | |||||
| AC charge | An optional accessory when there in no solar power supply and charging by mains supply | |||||
-
1.Battery level
-
When turn on power switch 'Battery Switch', the built-in solar controller starts to work, the Battery indicator on the panel "25% - 50% - 75% - 75%"
2.Battery(Power) switch
To turn the power on/off (Tip: If this equipment is not used for a long without connecting solar panels, must turn off the "power switch")
3.Two 12VDC Output ports
4.Battery discharge lamp &Charge lamp
When the system is normally connected to the solar panel, the charging status indicator "CHA" is steady green light, indicating that the system charging circuit is normal.
When the battery voltage is within the normal range, the discharge status indicator "CHA" is steady orange light.
5.USB 5VDC Output ports
6.Solar panel interface
Company profile
Company Information
Foshan SNAT Energy Electrical Technology Co. Ltd, established in 2004. As a world's leading supplier for solutions for electric energy and new energy, SNAT has powerful strength and is engaged in field of solar inverters, solar inverters with built-in solar controller, solar controllers, UPS, which are used for household, telecommunication, electricity, infrastructure and industrial markets. At the same time, our company is concurrently engaged in solar panels, batteries for solar power system. All products purchased by our company have our warranty commitment, parts will be shipped for free during warranty period. We have professional technical team and are focus on customers' demands.
We support OEM/ODM service. As a professional factory and state of the advanced equipment allow us to have the capability to design and manufacture a wide range of new items according to the buyer's requirements.
Product Recommended
-
Company Certification
-
FAQ
Q1: What is the warranty of your product?
A1: Quality warranty for 12 months; parts will be shipped free during warranty period.
Q2: Can you do OEM or ODM?
A2: Yes, we can offer the OEM or ODM service.
Q3: What is your delivery time?
A3: Within 5 day after receive advanced payment.
Q4: What minimum order do you require?
A4: 1 piece.
Q5: Why choose us?
A5: 1) Prompt delivery and good after-sale services.
2) We have our own factory, the selling prices is competitive.
3) All of our products have CE certification, ISO9001:2008, RoHS.
4) 80% new materials for production and superior quality.
5) Professional engineer designers.
Q6: Quality Service?
A6: Any inquiry replied within 12 hours.
Any problem resolved within 24 hours.
Please feel free contact us for more information!
Warmly welcome to visit our factory in Foshan city of China.
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--








