Product Specifications

Type

CMP 03

Product Description

10A-12V-ST  Waterproof  Mini Solar Regulator with Light + Time Controller

10A-12V

10A-12V-S(Light Control)

10A-12V-ST(Light + Time Control)

The Y-SOALR Series solar charge controller applies a microchip for intelligent control.The charging efficiency can be highly increased by using dual-mos charging circuit ,compared to normal diode for reserve current protection. The controller can extend the battery life with build-in 4-stage PWM charging program.It is equipped with various of protection function such as over-charge protection,over discharge protection ,over-load protection,reverse current protection.

Specification

Main Features

Solar Home System 

Attention

Connection Order:

Connect the battery with the controller.

Connect the solar panel with the controller.

Connect the load with the controller or inverter.

Disconnection order:

Disconnect the solar panel.

Disconnect the battery.

Disconnect the load.

Precautions:

please make sure connect your inverter with your battery

Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.

Install the controller at the vertical plane.

Instructions

Pacakge Included:

1. 1pcs10A solar Controller without light and timer controller

2. 1pcsuser manual

Introduction:

The Y-SOLAR Series solar charge controller applies a microchip for intelligent control.The charging efficiency can be highly increased by using dual-mos charging circuit ,compared to normal diode for reserve current protection. The controller can extend the battery life with build-in 4-stage PWM charging program.It is equipped with various of protection function such as over-charge protection,over discharge protection ,over-load protection,reverse current protection.

1.Build-in industrial micro controller. 2.LED display,auto memory function,IP68 protection. 3.Fully 4-stage PWM charge management. 4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection. 5.Dual MOSFET Reverse current protection ,low heat production. 

Function:

1. Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights.

2. Controller will start the lighting system in the evening automatically according to the surrounding luminance.

3. Controller can automatically shut down the lighting system:

A: Automatically shut down the light at dawn when battery is full.

B: Automatically shut down the light when battery is low.

The mode has been set inside the controller before exit the factory.Do ask  for further more information from your distributor.

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--