Product Specifications

Model Number

60I

Product Description

12V/24V 60Amp Solar Controller for Solar System with LCD 60I

20I-20A / 30I-30A / 60I-60A / 80I-80A

60A 12V Solar Controller 24V panel Battery Charge Controller Solar Home system indoor use LCD 60 Amps Solar Charge Controller

Main Features

Specification

Main Features

Solar Home System       Solar Street Light System 

Attention

Connection Order:

Connect the battery with the controller.

Connect the solar panel with the controller.

Connect the load with the controller or inverter.

Disconnection order:

Disconnect the solar panel.

Disconnect the battery.

Disconnect the load.

Precautions:

please make sure connect your inverter with your battery

Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.

Install the controller at the vertical plane.

Instructions60A 12V Solar Controller 24V panel Battery Charge Controller Solar Home system indoor use LCD 60 Amps Solar Charge Controller

keywords: 60a solar charge controller,solar charge controller 60 amps,solar regulator

Package including:

1. 1pcs 60a solar controller

2. 1pcs temp sensor

3. 1pcs user manual

Solar panel power: 720W/12V  1440W/24V

Data Sheet

Installation

1&period;Get ready for tools and cables&period; Advising you to matching the right cables&period; Ensure that the current density <4A&sol;mm2 that is conductive to reducing the line voltage drop&period; Recommendation&colon; 30A with 10mm2 cables&period; Check whether the installation sites compliance with the relevant safety requirements&period; Please avoid the damp&comma; dusty&comma; there is a place flammable&comma; explosive and corrosive gases use the controller to install&period; 

2&period;Install the controller into a fixed vertical plane&period; See section 5 of the pore size and pore spacing&period; In order to ensure a good thermal control conditions&comma; please set aside each 10cm below the controller space&period;

3&period; As shown on the right&comma; connect the &lpar;1&rpar; Load&comma; &lpar;2&rpar; Battery and &lpar;3&rpar; Solar Panel to the controller according to the order of &lpar;1&rpar; &lpar;2&rpar; &lpar;3&rpar;&period; Pay attention to the load&comma; battery&comma; solar panel and controller of same polarity&period;

4&period; Put the external temperature sensor into the left of the controller &lpar;probe port&rpar;&period; The temperature sensor should be placed at the similar space of the battery&period; &lpar;Otherwise&comma; the controller will control the parameters of all wrong temperature compensation&period;&rpar;

5&period; If you have remote monitoring and control function&comma; please insert one end of the included communication wire on the right of the controller &lpar;communication port&rpar;&comma; the other end to connect to the host computer&period;

Demolition&colon; To prevent accidents&comma; please order the demolition of solar panels&comma; battery and load disconnect with controller&period;

Note&colon;Battery polarity will not damage the controller&comma; but you will have a load equipment security risks&period;

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--