Product Specifications

--

Product Description

20A MPPT Solar PV Charging Regulator 

Introductions:

Tracer A series adopts advanced MPPT technology. It can fast and accurately track the maximum power point (MPP) of photovoltaic array in any situation and obtain the maximum solar energy at any time, which remarkably improves energy efficiency.

With Modbus communication protocol interface ,it is convenient for user to expand applications and meet monitoring requirements invarious fields like telecommunication base station, house hold system, lighting system etc. 

Models :

•Tracer1210A 10A, 12/24V auto work

•Tracer2210A 20A, 12/24V auto work

•Tracer3210A 30A, 12/24V auto work

•Tracer4210A 40A, 12/24V auto work

Features :

•Advanced MPPT technology

•High tracking efficiency no less than 99.5%

•Peak conversion efficiency of 98%

•Ultra-fast tracking speed

•Accurately recognizing and tracking MPP of multiple wave crest

•Automatic PV power limit function

•Multi-function LCD displays system information intuitively

•User programmable for battery types, load control etc.

•3-Stage charge with PWM output 

•Common positive grounding design

•RS485 port with industrial standard MODBUS open architecture

•Fully programmable function via remote meter, PC software and Mobile APP.

Electronic protections:

• PV over currentprotection

• PV short circuit protection

• PV reverse polarity protection

• Battery over voltage protection

• Battery over discharge protection

• Battery reverse polarity protection

• Battery overheating protection

• Load overload protection

• Load short circuit protection

• Controller overheating protection

Load working mode:

Manual (default)    Light ON/OFF     Light ON + Timer     Time Control     Test

Optional Accessories

Connection:

1) Connect components to the charge controller in the sequence as shown above and pay much attention to the "+" and "-". Please don't turn on the fuse during the installation. When disconnecting the system, the order will be reserved. 2) After installation, power the controller and check the LCD on. If it's not on, please refer to chapter 4. Always connect the battery first, in order to allow the controller to recognize the system voltage. 3) The battery fuse should be installed as close to battery as possible. The suggested distance is within 150mm. 4) The Tracer A series is a positive ground controller. Any positive connection of solar, load or battery can be earth grounded as required.

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--