24V/12V 40A PWM Solar Charge Controller 4-LED Indicators 40I
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
40A Solar Charge Controller 12V 24V Solar Panel Battery Controller Light and Timer Control for Off-Grid Solar PV 40I
Brand New PWM 40A Solar Charge Controller Panel Regulator 12V 24V The Solar lighting Controller for solar system with automatic lighting control and time functions. The Solar Controller is designed with a microcontroller for automatic lighting control functions. Proven reliability Precise lighting controller PWM battery charging Microcontroller digital accuracy Fully automatic operation 16 field adjustable lighting control options Manual test capability Detects day and night using the PV array Suitable for all 12V /24V lamps Suitable for Seal lead acid battery,AGM,GEL Temperature compensation
Specification
| Model | 40I |
| Rated Working Current | 40A |
| Rated Working Voltage | 12V/24V |
| Voltage of Solar Panels | ≤50V |
| Float Charging Voltage | 13.8V |
| Low Voltage Protection | 11.2V |
| Low Voltage Recovery | 12.6V |
| Working Temperature | -10ºC~60ºC |
| Storage Temperature | -30ºC~70ºC |
Main Features
Application Method
Solar Home System
| System | 12V | 24V |
| Max PV Input Power | 480W | 960W |
| Max PV Input Voltage | 30V | 50V |
| Battery Voltage | 12V | 24V |
| Load Output Current | 40A | 40A |
Attention
Connection Order:
1.Connect the battery with the controller.
2.Connect the solar panel with the controller.
3.Connect the load with the controller or inverter.
Disconnection order:
1.Disconnect the solar panel.
2.Disconnect the battery.
3.Disconnect the load.
Precautions:
1.please make sure connect your inverter with your battery
2.Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.
3.Install the controller at the vertical plane.
Instructions
Features:
Microcontroller digital accuracy
PWM Charge mode
State of charge (SOC)
Temperature compensation with external temperature sensor
Detects day and night using the PV array
Big terminals and big distance between terminals
Functions:
Short circuit protection
Reverse polarity protection
Reverse current protection at night
Over charging or discharging protection
Over load protection
System Indicator
1.Solar Indictor
off:without enough sun,charge off.
Fast flashing:Buck/equalize charge
Constant on:Acceptance charge
Slow Flashing:Float Charge
2.Battery indicator
Green: Battery Power is full
Orange:Battery power is middle
Red:Battery Power is low
Red Flashing:Battery over discharge
3.Consume indicator
Off:Controller ouput closed
ON:output normal
Slow flashing:Coninus over current
Fast Flahsing: Short Circuit
LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
LOAD LED:
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-13 hours.
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--








