30A 12V/24V Solar Charge Regulator with Light+Timer Control M30
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
MPPT 30A 12V/24V Solar Charge Regulator with Metal Shell, LCD Display M30
M10-10A / M20-20A / M30-30A
This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
Specification
Model | M30 |
Maximum power current | 30A |
Installation Lin(mm2) | 10mm2 |
Installation Line(AWG) | 7(AWG) |
Weight | 475g |
Dimensions | 187*97*61(mm) |
System load loss | ≤13mA |
Loop Buck | ≤100mV |
Battery float voltage | 13.8V(12V system)/27.6V(24V system) |
Battery (under voltage) protection | 10.6V(12V system)/21.2V(24V system) |
Battery (under voltage) recovery voltage | 12.6V(12V system)/25.2V(24V system) |
Charge mode | MPPT+PWM MODE |
Operating Temperature | -10°C~60°C |
Storage Temperature | -30°C~70°C |
Humidity requirements | ≤90%, No condensation |
Temperature compensation | -4mV/Cell/°C |
Temperature Probe (built components) | NTC 100K thermistats |
Maximum open circuit voltage of the solar panel | 18V-24V(12V system)36V-48V(24V system) |
Solar panels maximum open circuit voltage (V) | ≤48V |
The peak voltage of the solar cell panel | 18V-25V |
Peak power of solar cell panel | 200W-380W |
Battery standard voltage | 12V |
Battery capacity | ≥300AH |
Installation Lin(mm2) | 10mm2 |
Installation Line(AWG) | 7(AWG) |
Main Features
Features:
Solar LCD series a kind of intelligent,multipurpose solar charge and discharge controller
1. LCD screen display
2. Easy operation interface
3. PWM charging mode
4. Parameter user can reset,
5. A key to open and close the load,
6. A key to restore the factory settings,
7. Battery reverse discharge protection,
8. Battery reverse polarity protection
9. Battery under voltage protection,
10. Overload, short-circuit protection,
11. Automatic temperature compensation function.
Application Method
Attention
Connection Order:
Connect the battery with the controller.
Connect the solar panel with the controller.
Connect the load with the controller or inverter.
Disconnection order:
Disconnect the solar panel.
Disconnect the battery.
Disconnect the load.
Precautions:
please make sure connect your inverter with your battery
Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.
Install the controller at the vertical plane.
Instructions
30A Solar Charge controller 12V solar Panel battery charger control LCD display dual timer function M10 250w solar panels M30
keywords: solar charge controller lcd,lcd solar regulator
notice: Not True MPPT,there is no large transformer coil inside.
This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
Package including:
1. 1pcs M10 10a controller
2. 1pcs user manual
3. 1pcs temp sensor
Solar LCD series a kind of intelligent, multi-purpose solar charge and discharge controller
LCD screen display | Battery reverse discharge protection |
Easy operation interface | Battery reverse polarity protection |
MPPT+ PWM charging mode | Battery under voltage protection |
Parameter user can reset | Overload, short-circuit protection |
A key to open and close the load | Automatic temperature compensation function |
A key to restore the factory settings |
Images :
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--