Product Specifications

--

Product Description

Overview

Quick Details

Place of Origin: Anhui, China

Brand Name: TGE

Model Number: CTGWS200W-24V

Rated Voltage: 12V/24V/48V

Maximum Current: 10A

Application: Wind Controller

Rated wind power: 100W-800W

Rated solar power: 100W-500W

system battery: 12V/24V48V

Wind charging mode: PWM

Solar charging mode: PWM

display: LCD

Certificate: CE

Communication function: RS232,RS485 (alternative)

Supply Ability

Supply Ability: 500 Piece/Pieces per Month for wind solar hybrid streetlight controller

Packaging & Delivery

Function and Features

> Intelligent limiting of batteries max current

> Wind charging manual switch

On the controller you can manually set whether using solar charge to battery.

> DC output has 4 working modes

By RS232 or RS485 serial interface communication, you could monitor the whole system, storage and analyze data.

Software is free, easy to operate and no need to be installed.

Warranty

, if failure occurs when the product normal using, our company will repair or replace the failure product.

> Our company reserves the right to change products and without notice when products update.

Optional Functions

constant-current sourceconstant-current source> Electrical Parameter

230*186*140MM 

Shipping by courier, by air, by sea, it depends on clients request.

Our Services

2 year warranty; We provide free maintenance during warranty if our products have problem; Will always give good warm after sales service to clients in time;

Application

FAQ

Q: what is the boost function?

A: it is desinged for low voltage output wind generator, which can automatically work after setting the boost starting voltage, such as if your wind turbine rated voltage is 24V, while boost start voltage setted 20V,  the controller will start to charge the battery while it detected the wind output voltage meets 20V. It will take full use of the wind power.

Q: what is the buck function?

A: it is desinged for high output voltage eind generator.

The controller will start buck function automatically once the real -time rectified DC Current is higher than rectified DC Current at Rated Power (.Cause the wind turbine will be burnt once the real-time rectified DC Current is too high, )

The buck function will convert the high voltage (U1) and low current (I1) from generator (DC, after rectifying) in the low voltage (U2) and high current (I2) to battery .

Q: how do I know which function is necessary for my system?

A: normally we need know the basic information of the wind turbine, rated output voltage and maximum output voltage. If you don't know exactly, just ask your turbine supplier; or kinldy provide us the power curve and voltage curve of wind turbine for checking by ourselves.

Q: What is the RS232 communication function?

A: it is for setting and checking the parameters of wind turbine, battery, controller from computer. Software free.

Q: What is the USB data logging function?

A:  It is designed for collecting parameters of wind turbine, battery, charge controller from controller into USB flash disk. You can check it on any others computer.

Q: can I by 1 pc sample? what is the price?

A: of course, you can buy 1 pc, we always welcome clients to buy 1 pc as sample to make the test firstly. Then they will make sure this is good choice or not for their system. 

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--