Product Specifications

--

Product Description

48V 30A Solar Panel Charger Battery Controller for solar system with Light and Timer Control CM3048

30A 48V

CM series controller is a kind of intelligent and multifunctional solar charge controller. These serial products adopt customized LCD display screen, which makes the operation on the interface rather convenient. All the controlling parameters can be reset flexibly to satisfy your different needs.

Specification

Main Features

1)Visual LCD graphic symbol  

2)Brief key operation

3)Grade auto switch of system voltage   

4)Intelligent PWM Charging Mode

5)Auto temperature compensation      

6)Adjustable charging & discharging parameter           

7)Settable working modes of loads      

8)Accumulative function of charging & discharging AH

9)Remote Monitoring Function       

10)Protection for battery back discharging

11)Protection for battery low voltage    

12)Overloading & short-circuit protection

13)Battery reversed protection  

14)Delayed auto restart after overloading protection

Application Method

Attentio

Connection Order: 

1.Connect the battery with the controller. 

2.Connect the solar panel with the controller. 

3.Connect the load with the controller or inverter. 

Disconnection order: 

1.Disconnect the solar panel. 

2.Disconnect the battery. 

3.Disconnect the load. 

Precautions: 

1.please make sure connect your inverter with your battery 

2.Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases. 

3.Install the controller at the vertical plane.

Instructions

1&period; Ready tools and cables&period; Encourage you to matching the right cables&period; Ensure that the current density<4mm2 that is conductive to reducing the line voltage drop&period; Recommended&colon; 60A with 20mm2 cable&period; Check weather the installation sitescompliance with the relevant safety requirements&period; Please avoid the damp&comma; dusty&comma; there is a place flammable&comma; explosive and corrosive gases use the controller to install&period;

2&period; Install the controller into a fixed vertical plane&period; See section 5 of the pore size and pore spacing&period; In order to ensure a good thermal control conditions&comma; please set aside each 10cm below the controller space&period;

3&period; As shown on the right&comma; connect the &lpar;1&rpar; Load&comma; &lpar;2&rpar; Battery and &lpar;3&rpar; Solar Panel to the controller according to the order of &lpar;1&rpar; &lpar;2&rpar; &lpar;3&rpar;&period; Pay attention to the load&comma; battery&comma; solar panel and controller of same polarity&period;

4&period; Put into the external temperature sensor on the left of the controller &lpar;probe port&rpar;&period; The temperature sensor should be similar space with battery&period; &lpar;Otherwise&comma; the controller will control the parameters of all wrong temperature compensation&period;&rpar;

5&period;If you have remote monitoring and control function&comma; please insert one end of the included communication wire on the right of the controller &lpar;communication port&rpar;&comma; the other end to connect to The host computer&period;

Demolition&colon; To prevent accidents&comma; please order the demolition of solar panels&comma; battery and load disconnect with controller&period;

Note&colon;Battery polarity will not damage the controller&comma; but you will have a load equipment security risks&period;

&period;

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--