5kw 10kw 12kw 3 phase pure sine wave hybrid solar inverter
$2400
/piece
price excl.VAT
Negotiable
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
Overview
Quick Details
Place of Origin: Zhejiang, China
Brand Name: SANDI
Model Number: SDP-12KW
Output Power: 1 - 200KW
Input Voltage: 192V/240V
Output Voltage: 3 phase
Output Current: 54.5A
Output Frequency: 50Hz/60Hz
Output Type: Multiple
Size: 550x600x800mm
Type: DC/AC Inverters
Weight: 140kg
Load Power (W): 12KW
AC output waveform: Pure sine wave
Phases: Single/two/3-Phase optional
Efficiency: ≥95%
THD: <3%
Display: LCD
Start mode: Step down voltage start or variable frequency drive
Isolation mode: Low Frequency Transformer
Certifications: European CE(EMC&LVD)
AC Bypass: Battery Power Priority or AC Priority
Supply Ability
Supply Ability: 6000 Piece/Pieces per Month
Packaging & Delivery
5kw 10kw 12kw 3 phase pure sine wave hybrid solar inverter
Technical Features:
1.Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, It with powerful
protection function for short circuit, over load and over temperature which is more safe and reliable. Longer service life can up to 15-20 years or more.
2. Intelligentized, modularized and simple structure design, very easy and convenient for maintenance.
3. Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. Variable Frequency Start is suitable for inductive load with big instant inrush current(such as motor), inverter’s power not need enlarge too many times when take motor induction load. This function save the cost of frequency converter’s usage, easy to connect wires and control.
4. The output frequency 50Hz/60Hz can be set via LCD panel.
5. The output voltage can be set between -40 % to +20 % of rated voltage. And the accuracy of output voltage is very high less than 1%.
6. The DC input voltage range can be set. over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point and under voltage recovery time all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries and solar panel in the future.
7. Wide input voltage can be selected from 100-400v or 300-850v.
This wide voltage input off grid inverter can work without battery and solar charge controller, which save
battery cost and same like with MPPT function can maximum make full use of solar power.
8.Pure sine wave output. with good transient response less than 50MS, little harmonic distortion, higher
conversion efficiency and stable output voltage.
9. Low frequency transformer, which ensure the AC busbar and DC busbar are completely isolated, inverter with higher efficiency >94% and very little no-load loss.
10.Powerful data display and fault instruction function. LCD can display the DC input voltage, output
frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date,
temperature, fault code display.
11. AC bypass input function optional: Battery Power Priority or AC Bypass Priority work mode can be set.
12. RS485 remote monitoring function optional
13. Solar charge controller and AC to DC battery charger built in optional for customer
14. Can be customized to customer’s specification.
[Optional]
- RS485 remote monitoring
- AC Bypass input
- Built in solar charge controller and AC to DC battery charger
Parameters:
Model | SDP-12KW | ||||||
Isolation mode | Low Frequency Transformer | ||||||
DC Input | Rated voltage (Vdc) | 48V | 96V | 192V | 240V | ||
Rated current(A) | 250A | 125A | 62.5A | 50A | |||
AC Output | Rated output power | 12KW | |||||
Output waveform | Pure Sine Wave | ||||||
Rated Voltage | 220V±3% | 110/220VAC±3% | 380VAC±3% | ||||
Phases | Single phase | 2 phase 3 wire | 3 phase 4 wire | ||||
Rated current (A) | 54.5A | 54.5A (phase current) | 18A (phase current) | ||||
Frequency | 50Hz or 60Hz | ||||||
Rated output voltage range (V) | 110/120/220/230/240/380/400/415/440VAC optional | ||||||
Phases | Single / Two/ Three phase optional | ||||||
Power Factor (PF) | >0.95 | ||||||
Overload Ability | 150%, 5 seconds | ||||||
Efficiency | >94% | ||||||
Waveform distortion rate (THD) | <3%(Linear load) | ||||||
Dynamic Response (0 to 100% load) | 5%, ≤50ms | ||||||
Display | LCD | ||||||
Running mode | Working continuously | ||||||
Electrical insulation properties | 2000Vac, 1 Minute | ||||||
AC Bypass Function | Optional | ||||||
Solar Charge Controller built in | Optional | ||||||
AC to DC battery Charger built in | Optional | ||||||
RS485 remote monitoring | Optional | ||||||
Wide voltage input 100-850VDC(optional) | Off grid inverter can work without battery | ||||||
Protection Function | Protection | Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. | |||||
Cooling method | Fan-cooled | ||||||
Short-circuit protection | No automatic recovery, need to restart the machine | ||||||
Working environment | Noise ( 1 meter) | ≤50dB | |||||
Degree of protection | IP20(indoor) | ||||||
Working Altitude (m) | ≤2000 | ||||||
Working temperature | -25~+55℃ | ||||||
relative humidity | 0~90%,non-condensing | ||||||
Mechanical dimension | Depth* Width * Height | 500x600x800mm | |||||
Weight (Kg) | 140Kg | ||||||
Certification | European CE(EMC & LVD), SAA | ||||||
Why choose us?
Packaging & Shipping
Welcome OEM service
MOQ=1 pc
Short delivery time
Can be custom made
Project Case
40KW Off Grid System Video Link: https://www.youtube.com/watch?v=QNxIN9RsJ6Y&feature=youtu.be
Certifications
Related Products
FAQ
Contact Us
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--
Comments
Welcome to zddshop comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations,
you may see comments from our Community Managers.
Sign up to post
Show More Comments
zpostcode
Recruit
weather
mreligion
Yellowpages
sport
constellation
shopping
name
game
directory
literature
Word
tour
furnish
Lottery
tftnews
lyrics
News
digital
car
dir
Edu
Finance
