Best Inverter 12kw 48V DC 110V/220VAC off Grid Best Solar Power Inverter with Auto Generator Starting, Battery Temperature Sensor
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
Type
DC/AC Inverters
Product Description
Best Inverter 12KW 48V DC 110V/220VAC Off Grid Best Solar Power Inverter with Auto Generator Starting, Battery Temperature Sensor
Main Introduction
HLP Series Pure Sine Wave Inverter is a combination of an inverter, charger, solar power and Auto-transfer switch into one complete system. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today.
Key Feature
Smart Remote Control (RMT)
Battery Temperature Sensor (BTS)
Automatic Generator Starting (AGS)
Support Solar Panel with MPPT Function
Designed to Operate under Harsh Environment
DC Start & Automatic Self-Diagnostic Function
Compatible with Both Linear & Non-Linear Load
Easy to Install & Easy to Operate & Easy to Solve
Low DC Voltage Supports Home & Office Appliances
Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
High Efficiency Design & "Power Saving Mode" to Conserve Energy
Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
13 Vdc Battery Recover Point, Dedicated for Renewable Energy Systems
8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
Technical specifications
Model | 1.0KW | 1.5KW | 2.0KW | 3.0KW | 4.0KW | 5.0KW | 6.0KW | 8.0KW | 10.0KW | 12.0KW |
Continuous Output Power | 1.0KW | 1.5KW | 2.0KW | 3.0KW | 4.0KW | 5.0KW | 6.0KW | 8.0KW | 10.0KW | 12.0KW |
Surge Rating(20ms) | 3.0KW | 4.5KW | 6.0KW | 9.0KW | 12.0KW | 15.0KW | 18.0KW | 24.0KW | 30.0KW | 36.0KW |
Inverter Output | ||||||||||
Output Waveform | Pure Sine wave/Same as input(Bypass Mode) | |||||||||
Nominal Efficiency | >88%(Peak) | |||||||||
Line Mode Efficiency | >95% | |||||||||
Power Factor | 0.9-1.0 | |||||||||
Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac | |||||||||
Output Voltage Regulation | ±10% RMS | |||||||||
Output Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | |||||||||
Short Circuit Protection | Yes( 1sec after fault ) | |||||||||
Typical Transfer Time | 10ms(Max) | |||||||||
THD | < 10% | |||||||||
DC Input | ||||||||||
Nominal Input Voltage | 12.0Vdc / 24.0Vdc / 48.0Vdc | 24.0Vdc / 48.0Vdc | 48.0Vdc | |||||||
Minimum Start Voltage | 10.0Vdc / 10.5Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc; | ||||||||
Low Battery Alarm | 10.5Vdc / 11.0Vdc for 12Vdc Mode | |||||||||
Low Battery Trip | 10.0Vdc / 10.5Vdc for 12Vdc Mode | |||||||||
High Voltage Alarm | 16.0Vdc for 12Vdc Mode | |||||||||
Low Battery voltage recover | 15.5Vdc for 12Vdc Mode | |||||||||
Idle Consumption-Search Mode | < 25 W when Power Saver On.(Refer to Table ) | |||||||||
Charger | ||||||||||
Output Voltage | Depends on battery type (Refer to Table 2.5.2) | |||||||||
Charger Breaker Rating | 10A | 15A | 20A | 20A | 20A | 30A | 30A | 40A | 40A | 40A |
Max Charge Power Rate | 1/3 Rating Power (Refer to Table 2.5.3) | |||||||||
Battery Initial Voltage for Start | 10-15.7Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc; | ||||||||
Over Charge Protection S.D. | 15.7Vdc for 12Vdc Mode | |||||||||
BTS | ||||||||||
Battery Temperature Sensor(Optional) | Yes(Refer to the table ) Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature. | |||||||||
Bypass & Protection | ||||||||||
Input Voltage Waveform | Sine wave (Grid or Generator) | |||||||||
Nominal Voltage | 110Vac | 120Vac | 220Vac | 230Vac | ||||||
Max Input AC Voltage | 150VAC For 120Vac LV Mode;300VAC For 230Vac HV Mode; | |||||||||
Nominal Input Frequency | 50Hz or 60Hz | |||||||||
Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz | |||||||||
High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz | |||||||||
Overload protection(SMPS load) | Circuit Breaker | |||||||||
Output Short circuit protection | Circuit Breaker | |||||||||
Bypass breaker rating | 10A | 15A | 20A | 30A | 40A | 40A | 40A | 50A | 63A | 63A |
Transfer switch rating | 30Amp for UL & TUV | 40Amp for UL | 80Amp for UL | |||||||
Bypass without battery connected | Yes (Optional) | |||||||||
Max bypass current | 30Amp | 40Amp | 80Amp | |||||||
Solar Charger | ||||||||||
Rated Voltage | 12Vdc / 24Vdc / 48Vdc | |||||||||
Solar Input Voltage Range | 15-30Vdc / 30-55Vdc / 55-100Vdc | |||||||||
Rated Charge Current | 40 ~ 60A | |||||||||
Rated Output Current | 15A | |||||||||
Self Consumption | < 10mA | |||||||||
Bulk Charge(Default) | 14.5Vdc for 12Vdc Mode | ( *2 for 24Vdc, *4 for 48Vdc) | ||||||||
Floating Charge(Default) | 13.5Vdc for 12Vdc Mode | |||||||||
Equalization Charge(Default) | 14.0Vdc for 12Vdc Mode | |||||||||
Over Charge Disconnection | 14.8Vdc for 12Vdc Mode | |||||||||
Over Charge Recovery | 13.6Vdc for 12Vdc Mode | |||||||||
Over Discharge Disconnection | 10.8Vdc for 12Vdc Mode | |||||||||
Over Discharge Reconnection | 12.3Vdc for 12Vdc Mode | |||||||||
Temperature Compensation | -13.2mV/ºC for 12Vdc Mode | |||||||||
Ambient Temperature | 0 ~ 40ºC(Full load) 40 ~ 60ºC(Derating) | |||||||||
Mechanical Specifications | ||||||||||
Mounting | Wall Mount | |||||||||
Inverter Dimensions(L*W*H) | 388*415*200mm | 488*415*200mm | 588*415*200mm | |||||||
Inverter Weight(Solar Chg)KG | 21+2.5 | 22+2.5 | 23+2.5 | 27+2.5 | 38+2.5 | 48+2.5 | 49+2.5 | 60+2.5 | 66+2.5 | 70+2.5 |
Shipping Dimensions(L*W*H) | 550*520*310mm | 650*520*310mm | 750*520*310mm | |||||||
Shipping Weight(Solar Charge)KG | 23+2.5 | 24+2.5 | 25+2.5 | 29+2.5 | 40+2.5 | 50+2.5 | 51+2.5 | 62+2.5 | 68+2.5 | 72+2.5 |
Display | Status LEDs / Status LEDs+LCD | |||||||||
Standard Warranty | 2 Years (Optional) |
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--