Cspower Battery Pure Sine Wave Solar Inverter 500W 8000W for Solar System
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
Pure Sine Wave Solar Inverter 500W~8000W for Solar System
Characteristics
Powerstar Low Frequency Pure Sine Wave Inverter is from 500W to 8000W, DC12V-72V, AC 110V/220V/230V, 50Hz or 60Hz, LCD indicators display.
Off grid solar inverter with pure copper transformer, peak power three times, with built-in DC Charger 35/70Amp, Charger current adjustable, UPS Function.
Pure Sine Wave Solar Inverter 500W~8000W for Solar System
Advantages:
*LCD digital display show voltage, load and battery info in real time.
*Peak power is three times of rated power.
*Can work with inductive load such as air conditioner, motor door and so on.
*Pure sine wave output, available for sensitive load.
*4-step progressive charging, 7 battery type selector.
*Fast and powerful charger with 35A and 70A.
*Accept generator's energy output.
*High power factor 0.9, low power consumption.
*Automatically transfer between battery and line modes.
*Microprocessor control guarantees high reliability.
*Bypass without battery connected.
*Remote control function.
*Protection against: Over load, over temperature, over charging, low battery
*Reverse connection (optional by hard connector), Blackouts
Pure Sine Wave Solar Inverter 500W~8000W for Solar System
Based on transformer technology, strong loading capacity.
Used for all kinds of home/office equipments and Off Grid solar power system.
| MODEL | LW-1000 | LW-1500 | LW-2000 | LW-3000 | LW-4000 | LW-5000 | LW-6000 | ||||
| Nominal Power | 1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W | ||||
| AC Input | |||||||||||
| Phase & waveform | Single phase & Pure Sine Wave | ||||||||||
| Voltage | 110/120/130VAC or 220/230/240VAC | ||||||||||
| Acceptable Voltage | 95-126VAC or 194-253VAC±4% | ||||||||||
| Low Line Disconnect | 85VAC±4% or 184VAC±4% | ||||||||||
| Low Line Re-connect | 95VAC±4% or 194VAC±4% | ||||||||||
| High Line Disconnect | 136VAC±4% or 263VAC±4% | ||||||||||
| High Line Re-connect | 126VAC±4% or 253VAC±4% | ||||||||||
| Frequency | 50Hz:41-54Hz 60Hz:51-64Hz | ||||||||||
| AC Output | |||||||||||
| Phase & waveform | Single phase & Pure Sine Wave (bypass mode sync to input) | ||||||||||
| Voltage | 110/120/130VAC or 220/230/240VAC±10%rms (bypass mode sync to input) | ||||||||||
| Frequency | 50Hz±0.3Hz 60Hz±0.3Hz (bypass mode sync to input) | ||||||||||
| Peak Power | 3 times of rating power | ||||||||||
| Short Circuit Protection | Yes, shutdown after 10ms | ||||||||||
| Power Factor | 0.9-1.0 | ||||||||||
| DC Input | |||||||||||
| Battery Voltage | 12VDC or 24VDC or 48VDC | ||||||||||
| Minimum Start Voltage | 10VDC or 20VDC or 40VDC | ||||||||||
| Low Battery Alarm | 10.5±0.3vdc or 21±0.6vdc or 42±1.2vdc | ||||||||||
| Low DC input Shut-down | 10±0.3vdc or 20±0.6vdc or 40±1.2vdc | ||||||||||
| High DC input Alarm & Fault | 16±0.3vdc or 32±0.6vdc or 64±1.2vdc | ||||||||||
| High DC input Recovery | 15.5±0.3vdc or 31±0.6vdc or 62±1.2vdc | ||||||||||
| MAX Charger Current | 20A/35A/ 50A/75A/90A(According to the Inverter model) | ||||||||||
| System parameter | |||||||||||
| Battery Mode Efficiency | >85% | ||||||||||
| Line Mode Efficiency | >96% | ||||||||||
| power saver | Load <=25W (Enabled on "P/S auto" setting of Remote control) | ||||||||||
| Audible Alarm | Sounding when the heat sink's tem is over 100 and shutdown after 30 seconds. | ||||||||||
| Over Load Protection | 110% Load>150%, beeps 0.5s every 1s, and Fault after 20s. | ||||||||||
| Protections | low battery\over charging\over temp\over load | ||||||||||
| Communications | RS-232/USB/SNMP(custom-made) | ||||||||||
| Operating Environment | 0-40,0-90%RH(non-condensing) | ||||||||||
| Audible Noise | <60dB | ||||||||||
| Net Weight(KG) | 16kg | 18kg | 20kg | 25kg | 39kg | 42kg | 49kg | ||||
| Dimension L X W X H | 470 X223 X185mm | 650 X223 X185mm | |||||||||
http://cspower.en.made-in-china.com
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--








