MPPT 12V/24V/48V LCD+Backlight Solar Charge Controller MP-1015D
$37.93
/piece
price excl.VAT
Negotiable
- Minimal order
- 100 pieces
Message Phone call
Product Specifications
--
Product Description
15A-30A-45A-50A-60A-70A MPPT 12V/24V/48V Fangpusun Solar Charge Controller MP-1570D
Brief Instruction :
Y-SOALR solar charge controller,Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky,when light intensity is changing continuously,anultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT Controller.
Load Output :
Over-discharge of the battery can be prevented by connecting all loads to the load output.the load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Alternatively,an intelligent battery management algorithm can be chosen:see battery life.
The load output is short circuit proof.
Some loads(especially inverters)can best be connected directly to the battery,and the inverter remote control connected to the load output.A special.Interface cable maybe needed,please see the manual.
Function :
Extensive electronic protection
1) Over-Temperature protection and power derating when temperature is high.
2) PV short circuit and PV reverse polarity protection.
3) PV reverse current protection
Internal Temperature Sensor
Compensates absorption and float charge voltage for temperature
Display:
Graphical LCD Display
Operation:
Simple menu-driven operation
Programming by buttons
Advanced Maximum Power Point Detection in case of partial shading conditions.
If partial shading occurs,two or more maximum power points may be present on the power voltage curve.Conventional MPPT's tend to lock to local MPP,which may not be optimum MPP.The Innovative fangpusun algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan,Maximum efficiency exceeds 98%
Flexible Charge algorithm
Fully Programmable charge algorithm,and eight preprogrammed algorithms.selectable with a rotary switch
Data Sheet :
(PS:please check on the data sheet carefully,15A 30A 50A is 12/24v auto,45A 60A 70A is 12/24/48v auto,
The price in alibaba just 70A quotaiton,every current,the price is different,if you are interesting in any
of them,feel free to contact me for specific price.)
MP-1015D
| Solar Charge Controller | MP-1015D |
| System Voltate | 12/24v Auto Select |
| Maximum output Current | 15A |
| Maximum PV Power,12V 1a,b) | 200w |
| Maximum PV Power,24V 1a,b) | 400w |
| Maximum pv open circuit voltage | 100v |
| Maximum efficiency | 98% |
| Self-consumption | 20mA |
| Charge Voltage "absorption" | Default setting:14.4v/28.8v(adjustable) |
| Charge Voltage "float" | Default setting:13.8v/27.6v(adjustable) |
| Charge algorithm | multi-stage adaptive |
| Temperature compensation | (-16mV/ºC resp.-32mV/ºC) |
| Continuous/peak load current | 15A/50A |
| Low voltage load disconnect | 11.1v/22.2v or 11.8v/23.6v or battery life algorithm |
| Low voltage load reconnect | 13.1v/26.2v or 14v/28v or battery life algorithm |
| Protection | Battery reverse polarity(fuse)/outp ut short circuit /Over temperature |
| Operating Temperature | 30 to 60ºC(full rated output up to 40ºC) |
| Humidity | 95%,non-condensing |
| Enclosure | |
| Terminal(fine/single wire) | 6mm²/AWG10 |
| Protection category | IIP22(connection area) |
| Weight | 0.6kg |
| Dimensions | 136*98*55mm |
| Standards | |
| Safety | EN/IEC 62109 |
| 1a)If more PV power is connected,the controller will limit input power to the stated maximum. | |
| 1b)PV voltage must exceed Vbat+5V for the controller to start.There after minimum PV voltage is Vbat+1V | |
MP1030D MP-1050D
| Solar Charge Controller | MP1030D (MPPT 100/30D) | MP-1050D (MPPT 100/50D) |
| System Voltate | 12/24v Auto Select | 12/24v Auto Select |
| Maximum output Current | 30A | 50A |
| Maximum PV Power,12V 1a,b) | 440w (MPPT range 15v to 80V) | 700w(MPPT range 15v to 70V Resp.95v) |
| Maximum PV Power,24V 1a,b) | 880w(MPPT range 30v to 80v) | 1400w(MPPT range 30v to 70v Resp.95v) |
| Maximum pv open circuit voltage | 100v | |
| Maximum efficiency | 98% | |
| Self-consumption | 20mA | |
| Charge Voltage "absorption" | Default setting:14.4v/28.8v(adjustable) | |
| Charge Voltage "float" | Default setting:13.8v/27.6v(adjustable) | |
| Charge algorithm | multi-stage adaptive | |
| Temperature compensation | (-16mV/ºC resp.-32mV/ºC) | |
| Protection | Battery reverse polarity(fuse) /outp ut short circuit /Over temperature | |
| Operating Temperature | 30 to 60ºC (full rated output up to 40ºC) | |
| Humidity | 95%,non-condensing | |
| Enclosure | ||
| Terminal(fine/single wire) | 13mm²/AWG6 | |
| Protection category | IIP43(connection area) , IIP22(connection area) | |
| Weight | 1.25kg 1.6kg | |
| Dimensions | 186*125*83mm | |
| Standards | ||
| Safety | EN/IEC 62109 | |
| 1a)If more PV power is connected,the controller will limit input power to 440W resp.880w(MPPT 100/50:700W resp.1400w) | ||
| 1b)PV voltage must exceed Vbat+5V for the controller to start.There after minimum PV voltage is Vbat+1V | ||
MP-1545D MP-1560D MP-1570D
| Solar Charge Controller | MP-1545D (MPPT 150/45D) | MP-1560D (MPPT 150/60D) | MP-1570D (MPPT 150/70D) |
| System Voltate | 12/24/48v Auto Select(Only Factory Setting 36v) | ||
| Maximum output Current | 45A | 60A | 70A |
| Maximum PV Power,12V 1a,b) | 650W | 860W | 1000W |
| Maximum PV Power,24V 1a,b) | 1300W | 1720W | 2000W |
| Maximum PV Power,48V 1a,b) | 2600W | 3440W | 4000W |
| Maximum pv open circuit voltage | 150v absolute maximum coldest conditions,145v start-up and operating maximum | ||
| Maximum efficiency | 98% | ||
| Self-consumption | 20mA | ||
| Charge Voltage "absorption" | Default setting:14.4/28.8/43.2/57.6v(adjustable) | ||
| Charge Voltage "float" | Default setting:13.8/27.6/41.4/55.2v(adjustable) | ||
| Charge algorithm | multi-stage adaptive | ||
| Temperature compensation | (-16mV/ºC resp.-32mV/ºC) | ||
| Protection | Battery reverse polarity(fuse,not user accessible) PV reverse polarity/out put short circuit/Over temperature | ||
| Operating Temperature | 30 to 60ºC(full rated output up to 40ºC) | ||
| Humidity | 95%,non-condensing | ||
| Parallel operation | Yes(not synchronized) | ||
| Enclosure | |||
| PV Terminal 2) | 35mm²/AWG2(Tr models) | ||
| Battery Terminals | 35mm²/AWG2 | ||
| Protection category | IIP43(connection area) ,IIP22(connection area) | ||
| Weight | 3.3kg | ||
| Dimensions | Tr models248*178*103mm | ||
| Standards | |||
| Safety | IEC 62109-2010 | ||
| 1a)If more PV power is connected,the controller will limit input power to the stated maximum. | |||
| 1b)PV voltage must exceed Vbat+5V for the controller to start.There after minimum PV voltage is Vbat+1V | |||
Supply Ability
--
Packaging and Shipping
Lead time
--
Port
--
Packaging details
--
Comments
Welcome to zddshop comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations,
you may see comments from our Community Managers.
Sign up to post
Show More Comments
zpostcode
Recruit
weather
mreligion
Yellowpages
sport
constellation
shopping
name
game
directory
literature
Word
tour
furnish
Lottery
tftnews
lyrics
News
digital
car
dir
Edu
Finance
