Product Specifications

Model Number

20I

Product Description

20Amp 12V/24V Solar Power Controller with LED Indicator 20I

20-20A / 30I-30A / 60I-60A / 80I-80A 

Specification

Main Features

Application Method

Attention

Connection Order:

Connect the battery with the controller.

Connect the solar panel with the controller.

Connect the load with the controller or inverter.

Disconnection order:

Disconnect the solar panel.

Disconnect the battery.

Disconnect the load.

Precautions:

please make sure connect your inverter with your battery

Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.

Install the controller at the vertical plane.

General  Pakage

Display:

4 LED indicators

PV: Green -charging

Battery: Green-Yellow-Red

Load: Red -output on

Red slow flashing& blinking shows mistakes

The fourth double LED shows timers

LED indicator:

Solar Panel LED:

Green ON when solar is charging Battery.

Green blink when the syetem over voltage

Battery LED:

Green ON when battery level in the right range

Green Slowly flashing when battery level full

Yellow ON when battery level low

RED ON when loads cut off.

LOAD LED:

RED ON when the output is on

RED slowly flashing when it`s over load

(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)

RED blink when the load is short -circuit.

This controller has Light and Timer control Function

Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.

Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.

Supply Ability

--

Packaging and Shipping

Lead time

--

Port

--

Packaging details

--